How to Use scp Command to Securely Transfer Files in Linux

Suppose you want to transfer some files between servers on a Linux system. There are many ways you can accomplish the task, but if your priority is to transfer files securely, you’re left with a few options. The easiest solution is to use the scp or secure copy command to transfer your files without worrying about security. In this article, we will explain how to use transfer files securely using the scp command on your Linux system.

Table of Contents

What is scp Command in Linux

When it comes to transferring files over a secure network, the scp command can be very useful. It stands for Secure Copy Protocol and transfers files and directories between two systems over SSH (Secure Shell) connection. With ssh, you can be assured of the security of your files as they are encrypted by default. In simpler terms, the scp command is a more secure version of the cp command, which you can read all about in our Linux Terminal commands article.

How to Use the scp Command: Syntax & Options

Before we can transfer files via scp, let us see the syntax and options of the command right here:

scp <option> <host_user_name@host_ip_address:path/to/source/file> <target_user_name@target_ip_address:target/path>

Understanding the syntax:

• First, <host_user_name@host_ip_address:path/to/source/file> specifies the ‘source’ system from where you need to transfer your files/ directories.
• Second, <target_user_name@target_ip_address:target/path> specifies the ‘target’ system to which you want to transfer your files/directories.

If you leave either of the above parameters, the scp command in Linux will first look for the file and then copy the file locally. Some of the options to pair with the command are:

Options	Destination
-P	Specifies which port to connect with the host system. If omitted, then it’ll use port 22 by default.
-p	Preserves modification times, access times, and modes from the original file when copied to the target system.
-r	Copies the entire directory to the target system recursively.
-J	Used to connect the source system and destination system via a proxy system (jump host).
-3	when this flag is used, it copies the files to both the target system as well as the local system
-4	forces the scp command to use only IPv4 addresses.
-6	forces the scp command to use only IPv6 addresses.

How to Copy Files Using the scp Command

Before using the scp command in Linux, there are some prerequisites that you need to fulfill on both the host and target systems:

• ssh should be installed
• root access or any user with sudo privileges

Copy Files from Local Host to Remote Target

If you have a file you need to transfer from your local system to a remote target, you need to use the following syntax:

scp <options> <path_to_local_file> <remote_user>@<remote_target_ip_address>:<path_to_store_in_remote_destination>

If the above syntax may seem complicated, an example will clear it out:

scp test.txt remote2@139.144.11.105:/home/remote2/Documents/

In the above example:

• test.txt is the name of the file to be transferred and it’s located in the current directory of the local system.
• test is the username on the target system.
• 139.144.11.105 is the IP address of the target system.
• /home/remote2/Documents/ is the location on the target system where the transferred file will be saved.

Copy Files from Remote Host to Local Target

If you need to transfer a file from a remote host to your local machine, use the following scp command syntax on your Linux system:

scp <options> <remote_user>@<remote_host_ip_address>:<path_of_file_to_transfer> <path_to_store_file>

For example, let’s say you need to transfer a file named test.py from the remote server you are working on, use this command:

scp test@10.10.11.113:/home/test/test1.py ~/test1.py

In this example:

• test is the remote host username.
• 10.10.11.113 is the remote host IP address.
• /home/test/test1.py is the path of the file to be transferred from the remote host.
• ~/test1.py is the name of the file after it is transferred to the local machine and stored in the home directory.

Transfer Files from One Remote Host to Another Remote Target

With the scp command, you can not only transfer files between your local system and a remote machine but also transfer files between two remote systems. But, before you can transfer files from one remote system to another remote system, it’s recommended to generate a private ssh key and a public ssh key on the source system and store a copy of the public key in the destination system.

Generally, users complain about the “Host key verification failed” error when transferring files between two remote systems. To bypass the error, use an ssh-key as an added measure. We have explained how you can do that right here:

1. Generate a public/ private key pair on the source server with this command:

ssh-keygen -t <encryption_algorithm>

2. For encryption algorithms, you can use “rsa,” which is the most commonly used algorithm or any other algorithm of your choice.

3. Then, you will be asked to choose the location to store the ssh key. You can either store it at any location of your choice or in the default location.

4. For the passphrase, you can enter anything of your choice or leave it blank by pressing Enter.

5. Then, copy the public key to the destination server using the command below. With this, you can even log in to the destination system without a password using ssh.

ssh-copy-id <destination_username>@<destination_ip_address>

Note: the passwordless method of logging in will only work for the user for which you have generated the ssh-key.

6. Once you have created and stored the ssh key on the remote server, use this scp command syntax to exchange files between two remote systems running Linux:

scp <options> <remote_user_1>@<remote_host_ip_address>:<path_of_file_to_transfer> <remote_user_2>@<remote_target_ip_address>:<path_to_store_in_remote_destination>

Let’s say you need to transfer a file named test.txt from one remote host to another remote receiver, use the command:

scp remote1@10.10.11.113:/home/test1/test.txt remote2@10.11.27.111:/home/remote2/Documents/test1.txt

In this example:

• remote1 is the name of the user in the remote sender host
• 10.10.11.113 is the IP address of the remote sender host
• /home/test1/test.txt is the path to the file to be sent
• remote2 is the name of the user in the remote receiver target
• 10.11.27.111 is the IP address of the remote receiver target
• /home/remote2/Documents/test1.txt is the name and path to be saved for the file to be received.

Transfer Multiple Files Using the scp Command

Transferring multiple files one by one can be a tedious task for anyone. Instead, you can use the syntax below to exchange files using the scp command on Linux:

scp <path_to_file_1> <path_to_file_2> <remote_receiver>@<remote_target_ip_address>:<path_to_store_in_remote_destination>

For example – Suppose you need to send four files, including test1.txt, test2.py, test3.sh, and test4.c, to a remote receiver, you can use the command below:

scp -P 22 test1.txt test2.py test3.sh test4.c remote1@10.10.11.113:/home/remote_1/Documents

Let’s understand how the command in the example works and what it does:

• -p 2222 is used to specify to connect via port 22
• test1.txt test2.py test3.sh test4.c are the name of the files to be transferred
• remote_1 is the username of the receiving system
• 10.10.11.113 is the IP address of the receiver
• /home/remote_1/Documents refers to the path to store the received file.

You can even use wildcards to send multiple files with the same extension as shown below:

scp <wildcard>.<extension> <remote_receiver>@<remote_target_ip_address>:<path_to_store_in_remote_destination>

For example, if you need to send all .py files to a remote server, use the below scp command in the Linux Terminal:

scp *.py remote1@10.10.11.113:/home/remote_1/

Here,

• *.py signifies all python files
• remote1 is the receiver’s username
• 10.10.11.113 is the receiver’s IP address
• /home/remote_1/ is the location to store the received file

Transfer Files Securely Using scp Command in Linux

At some point in time, every user needs to exchange some files over the network. The scp command makes it easy to transfer files securely and efficiently even on a high-latency network. Surely, knowing the various scp options and syntax can be useful too. You can also refer to our guides on how to rename a file in Linux and how to delete a file in Linux to further improve your file management skills on the OS. We hope this article helped you learn how to use the scp command for transferring files on Linux computers. If you face any issues while using the command, do let us know in the comments section.

Frequently Asked Questions